COBEM99

S19 Usinagem dos Materiais

Title:

GRINDING OPERATION CAN BE IMPROVED BY THE USE OF CBN WHEELS

Summary :

THE SUPERABRASIVE GRINDING WHEELS, PREFERENTIAL USED WHEN GRINDING DTG MATERIALS, ARE TOLLS WHICH HAVE A HIGH CUT EFFECTIVENESS, COMPARING TO CONVENTIONAL ONES. THE SUPERABRASIVE GRINDING WHEELS CAN BE MANUFACTURED WITH DIFFERENT TYPES OF BONDS, DEPENDING ON THE APPLICATION.. IN THE LATEST YEARS, TECHNOLOGICAL PROGRESS IN THE TOOL MANUFACTURING PROCESS WERE REACHED, AND, NOWADAYS, THE GRINDING WHEELS WITH RESIN AND VITRIFIED BONDS ARE USED AT THE SAME RATE (31 AND 32%, RESPECTIVELY). THIS PAPER SHOWS A RESEARCH ABOUT THE COMPARATIVE BEHAVIOR BETWEEN TWO TYPES OF SUPERABRASIVE GRINDING WHEELS, MANUFACTURED WITH VITRIFIED AND RESIN BONDS, ANALYZED IN DIFFERENT CUTTING CONDITIONS. THE MATERIAL GROUNDED WAS THE VC 131 STEEL, QUENCHED. THE OUTLET PARAMETERS ANALYZED WERE: TANGENTIAL CUTTING FORCE, SUPERFICIAL ROUGHNESS AND G RATIO. SIGNIFICANT DIFFERENCES BETWEEN THE TWO TYPES OF TOOLS WERE OBSERVED ONLY IN THE RESULTS OF G RATIO, AND THE VITRIFIED BOND S TOOL PRESENTED THE HIGHEST VALUES. THE OTHERS OUTLET PARAMETERS PRESENTED A STABLE BEHAVIOR DURING THE TESTS. THE DIFFERENCES DETECTED ON THEM, CHANGING THE SUPERABRASIVE TOOL, WERE NOT SIGNIFICANT, BECAUSE, AT THE END OF EACH TRIAL, THE CUTTING TOOL STILL HAD CUTTING ABILITY TO REMOVE MUCH MORE MATERIAL. IT DECREASED THE DIFFERENCES THAT WOULD BE OBSERVED BETWEEN THE TOOLS. KEY WORDS: CBN GRINDING WHEEL, RESIN BOND, VITRIFIED BOND, VC131 STEEL.

Author :

Bianchi, Eduardo Carlos
Fernandes, Odilson Coimbra
Silva, Eraldo J. da
Valarelli, Ivan De Domenic

Paper View :

apostas esportivas afun