| 0053 |
Compressive Creep Behavior Of Hot-Pressed Si3n4 Ceramics |
| 0066 |
Fatigue Damage In Sae/Aisi 8620 Steel |
| 0090 |
Effect Of Surface Treatments On Titanium On The Osteogenesis
And Simulation Of The Microstresses In The Interface Titanium
/ Bone |
| 0149 |
Commercial Starch Consolidation Technique For Shaping Silicon
Carbide (Sic) Ceramics |
| 0223 |
Stresses In Composite Materials Used In Steel Pipe Repair |
| 0278 |
Changes In Volumetric Fraction Of Ferrite And Sigma Phases
After Isothermal Aging Between 700°C And 900°C Of Uns S31803
(Saf 2205) Duplex Stainless Steel |
| 0281 |
Microhardness Of Uns S31803 (Saf 2205) Duplex Stainless Steel
After Isothermal Aging Between 700°C And 900°C |
| 0286 |
Electrochemical Machining Of Sae-Xev-S Austenitic |
| 0304 |
Finite Element Failure Analysis Of An Internal Combustion
Gas Engine Insert |
| 0308 |
Simulation Of Quenching Process Using The Finite Element Method |
| 0338 |
Numerical Analysis On The Propagation Of Circular Crack During
Cyclic Indentation Of Coated Systems |
| 0339 |
Mechanical Behavior Analysis Of The High Density Polyethylene
After Been Submitted To Cyclic Loading |
| 0484 |
Axisymmetric Bem Formulation For Contact-Induced Crack Propagation
Analysis: Further Indentation Tests |
| 0538 |
A New Method For Hardness Calculation Using Instrumented Indentation
Testing |
| 0548 |
A Micromechanics Approach To Predict Burst Pressure In Cracked
Pipelines |
| 0558 |
Damage Accumulation Study In Fatigue Testing Using The Barkhausen
Noise |
| 0575 |
J-Q Approach For Cleavage Fracture In Different Structural
Components. |
| 0576 |
Fracture Toughness And Fatigue Crack Propagation Resistance
Properties In Corrosion Resistant Welded Joints(*) |
| 0623 |
Viscoelastic Properties Of Composite Laminated Beams By Dynamic
Mechanical Analysis |
| 0707 |
Hall-Petch Dependence Of J-Fracture Toughness Parameters For
A Rpv Steel - Part I: Annealed Microstructures |
| 0709 |
Structural Integrity Evaluation Of A Ball Mill |
| 0711 |
Hall-Petch Dependence Of J-Fracture Toughness Parameters For
A Rpv Steel Part Ii: Quenched And Tempered Microstructures |
| 0714 |
Hall-Petch Dependence Of Dynamic Fracture Toughness For A
Rpv Steel |
| 0731 |
Hall-Petch Dependence Of Dynamic Critical Stretch Zone Width
(Szwc) On Grain Size For A Rpv Steel |
| 0770 |
Microstructural Evaluation And Continuous Cooling Transformation
Curve Of A Microalloyed Medium Carbon Steel |
| 0851 |
Cellular Composites For Double Curvature Applications |
| 0874 |
A New Methodology For Composites Manufacturing Evaluation |
| 0882 |
Image Analyses Characterization Of The Microstructures In
Ductile Iron |
| 0972 |
Characterization Of Al/Polymer Composite Coating For Mechanical
And Adhesion Properties On Steel |
| 1033 |
Statistical Analysis Of The Influence Of The Injection Molding
Temperature On The Tensile Properties Of Polypropylene |
| 1038 |
Thermal Effects Of The Incidence Of Microwave Radiation On
Epoxi And Ferrite Coated Metallic Surfaces |
| 1052 |
Effect Of Load And Indenter Diameter On The Morphology Of
Film Cracks Developed During The Indentation Of Coated Systems |
| 1075 |
Modal Analysis Of Synthetic Graphite Beams |
| 1111 |
Tribological Characteristcs Of Synthetic Hydrogels For Biomedical
Applications |
| 1117 |
Fatigue Crack Propagation And Closure Behavior Of A Dual-Phase
Steel |
| 1224 |
On The Application Of The Dang Van Criterion In Fretting Fatigue |
| 1227 |
Plasma Transferred Arc Iron Aluminide Development |
| 1231 |
Fretting Fatigue: The Use Of Hcf Multiaxial Models |
| 1248 |
On The Relation Between Micro And Macroscopic Fatigue Crack
Growth Rates In Al-Alloy Laminated Plates |
| 1357 |
Microstructural Stability And Wear Performance Of A Ni Based
Alloy Pta Coating |
| 1395 |
Assessment Of The Stress And Strain Levels At Geometrical Discontinuities Under Elastoplastic Conditions: A Case Study |
| 1534 |
Interaction Crack / Dislocation: Stress And Displacement Fields
Calculation Using The Goursat’s Complex Potentials Method |
| 1635 |
The Influence Of A Crack Neighborhood On The Elastic Energy
Of A Loop Dislocation |
| 1648 |
Comparison Between Some Dynamic And Static Models Describing
The Plastic Zone |
| 1663 |
Effect Of Crude Oil Polar Components On The Wettability Of
Pipeline Surfaces |
| 1697 |
Properties Of Aa6061 Aluminum Alloy Reinforced With Different
Intermetallics And Ceramics Particles |
| 1817 |
Electromagnetic Properties Of Ceramic Materials |
| 1895 |
Stress Distribution In Coated Substrate |
| 1956 |
In VitroCorrosion Resistance Of A Superferritic Stainless
Steel In Hank’s Solution |
| 1957 |
Thermal Characterization And Evaluation Of Carbon/Epoxy Prepreg
Used In Aerospace Field |
| 1959 |
The Corrosion Resistance And Cytotoxicity Of A Commercial
Nd-Fe-B Magnet In Simulated Physiological Solution |
| 1989 |
Structure And Properties Of Nanocrystalline Soft Magnetic
Composite Materials With Polymer Matrix |
| 1990 |
Effects Of Alloying Elements Concentration And Cooling Rate
On Continuous Cooling Transformations Predicted By Neural Network |
