| 0028 |
Sensing Effectivess Of Piezoelectric Patches With Finite Stiffness
Bonding |
| 0030 |
Gears Coupling Efforts |
| 0036 |
Data Structure And Stationary Iterative Solution Methods For
Large Sparse Linear Systems |
| 0113 |
Numerical Modelling Of 2d Elastodynamic Problems Using Boundary
Elements And The Operational Quadrature Method |
| 0135 |
Experimental Analysis Of The Structural Dynamic Response Under
Uncertain Conditions |
| 0141 |
Assessment Of Simplified Pipe-Soil Interaction Models |
| 0150 |
Comparative Study On Single-Lap And Wavy -Lap Adhesive Bonded
Composites Joints |
| 0162 |
Structural Damping Estimation Of Mechanical Systems. |
| 0174 |
Wing Structure Modal Parameter Estimation And Qualification
Using Era |
| 0180 |
Probabilistic Structural Analysis Applied To Spring Leaf Suspension
Assembly Of Semi-Trailer Tank Vehicle |
| 0205 |
Optimization Techniques For Fault Identification In Rotor
Dymanics |
| 0211 |
Post-Buckling Analysis Of Slender Elastic Rods Subjected To
Uniform Thermal Loads |
| 0231 |
Post-Buckling Analysis Of Slender Elastic Rods Subjected To
Terminal Forces And Self Weight |
| 0243 |
Fault Detection Of Rotor-Support-Structure Including Foundation
Effects |
| 0255 |
Nonlinear Analysis Of Composite Beams With Partial Interaction |
| 0271 |
Controlling Chaos In A Nonlinear Pendulum |
| 0272 |
Chaos In Water Body Eutrophication |
| 0274 |
Modeling Surface Flaw Transition To A Through Crack |
| 0275 |
Propagation Of Curved Fatigue Cracks Under Variable Amplitude
Loading |
| 0277 |
Comparison Between Strain-Controlled And Stress-Controlled
Fatigue Test Procedures In Aa7175-T1 Aluminum Alloy |
| 0298 |
Horizontal Enlargement Of The Stress-Strain Loop On A Thermo-Plastic-Phase
Transformation Coupled Model For Shape Memory Alloys |
| 0299 |
Analysis Of Shape Memory Bars Using Finite Element Method |
| 0301 |
Finite Element Method Applied To Intelligent Beams With Shape
Memory Actuators |
| 0306 |
Quenching Process Modeling In Steel Cylinders Using A Multi-Phase
Constitutive Model |
| 0340 |
Development Of Software For Synthesis Of Truss-Based Compliant
Mechanisms Using Topology Optimization. |
| 0353 |
Dynamical Behavior Of A Portal Frame |
| 0357 |
On The Dynamics Of A Flexible Portal Frame Subjected To Two
No-Ideal Excitations |
| 0362 |
Boundary Element Analysis Of Panels Reinforced By Adhesive
Plates |
| 0379 |
Stress Elements For Elastoplasticity: A Trefftz Formulation
With Plastic Control On The Boundary |
| 0382 |
Denting And Collapse Of Thin-Walled Risers Under Lateral Loads |
| 0425 |
Comparison Among The Fem, Sem And Bessel-Based Dynamic Stiffness
Methods For Modelling Of Tapered Beams |
| 0446 |
Bending Effects On Fatigue Crack Propagation Of Circumferential
Butt Welds Of Api 5l X-65 Steel |
| 0464 |
Modeling Delamination In Laminate Structures Under Torsion
Loading |
| 0472 |
Topology Optimization Of Continuum Two-Dimensional Structures
Under Compliance And Stress Constraints |
| 0482 |
Nonlinear Analysis Of Flapping Motion Of Helicopter Rotor
Blades In Hover With Gust Effects |
| 0483 |
Experimental Determination Of Vibration Energy And Sea Coupling
Loss Factors Of A T-Shaped Beam |
| 0487 |
Analysis Of Adhesive Bonded Joints |
| 0502 |
Singular Solution Of An Integro-Differential Equation In Elastodynamics |
| 0507 |
Structural And Instrumentation Design Of A Force Sensor In
A Railway Coupler |
| 0508 |
A Theory For Laminated Plates With Piezoelectric Layers |
| 0527 |
Proposal Of Methodology For Obtaining The Response Of Randon
Excited Structures |
| 0546 |
An Exact Fem Geometrical Non-Linear Analysis Of Frames Based
On Position Description |
| 0547 |
Analysis Of Fastened Joints – Part 1: The Influence
Of Secondary Bending |
| 0553 |
Analysis Of Fastened Joints – Part 2: Determination
Of Stress Fields Around Fasteners |
| 0570 |
Propagation Of Sh And Lamb Waves In Bonded Plates |
| 0580 |
A Simple And Accurate Procedure For Shape Sensitivity Analysis |
| 0593 |
Behavior Of Era And Its Variants In The Presence Of Noise
As Function Of The Damping And Flexibility Of A Structure |
| 0597 |
Effective Damping Value Of Piezoelectric Transducer Determined
By Experimental Techniques And Numerical Analysis |
| 0605 |
Buckling Analysis Of Sandwich Plates: A Three Layer Quasi
3d Finite Element Model |
| 0624 |
Modeling The Strain Rate Corrosion Testing Of Austenitic Steels
Using Continuum Damage Mechanics |
| 0648 |
Dynamic Behaviour Of Typical Heavy Vehicles Submitted To Road
Irregularities |
| 0657 |
Dynamic Instability Of Fluid Filled Circular Cylindrical Shells |
| 0668 |
Parameter Identification Of A Rigid-Flexible Satellite Using
Kalman Filter |
| 0671 |
Influence Of The Anisotropy On The Mechanical Behavior Of
Laminated Beams |
| 0682 |
Low Cost Distributed Computational Implementation Of A Finite
Element Code For Flow Analysis Using Windows Environment |
| 0694 |
Mimo Modal Parameter Identification Under Stochastic Noise
Influence |
| 0700 |
Hovering Helicopter Blade Stability In Flutter |
| 0708 |
Multiobjective Solutions For Practical Engineering Trusses
Systems |
| 0726 |
Object Oriented Finite Element Implementation |
| 0766 |
Numerical Simulation Of Damage And Failure Of Composite Pressure
Vessels |
| 0768 |
Perturbation Of A Stationary Solution Of A Nonlinear Conservative
Sysyem Under Resonance Conditions |
| 0781 |
The Influence Of Reinforcement Beams In The Irradiation Efficiency
Of Simply Supported Plates |
| 0799 |
Comparison Between Multiple Vibration Absorbers And Single
Vibration Absorbers Systems |
| 0803 |
Effect Of Training And The Reduction Of The Austenitic Grain
Size On The Morphology Of The Stress-Induced Ģ`-Martensite In
Stainless Smas |
| 0821 |
Compliance Topology Optimization Of Laminate Shell Structures |
| 0845 |
A Time Domain Based Mechanical System Identification |
| 0847 |
Non-Linear Analysis Of Bending Stiffeners |
| 0856 |
Multi-Rigid-Body Contact Problems With Coulomb Friction: Complementarity
And Equivalent Formulations |
| 0881 |
Comparative Study Of Component Mode Synthesis Methods Applied
To Structure Dynamics |
| 0940 |
Non-Local Finite Strain Elasticity Models For Trusses |
| 0945 |
Model Of Hydroelectric Power Plant Trashracks Including Fluid-Structure
Interaction |
| 0950 |
Hopf Bifurcation Of Systems With Terms Of Type V|V| : An Analysis
Using The Central Manifold Theorem And Integral Averaging Techniques |
| 0951 |
Stress Analysis Of Healthy And Endodontically Treated Central
Incisors |
| 0969 |
Crush Behavior Of Flexible Risers: Prediction By An Analytical
And Experimental Approach |
| 0988 |
Inexact-Restoration Algorithms For Bilevel Programming Problems |
| 0992 |
A Study About The Deployment Of Solar Arrays On Satellites
Using Dc Motors |
| 1004 |
Analysis Of A Continuum Damage Model Of Brittle Materials |
| 1010 |
Point Collocation Method In Plasticity: Axisymmetric Case |
| 1088 |
A Note On EricksenīS Problem In The Case Of Two Distinct Constant
Stretches |
| 1095 |
Elastic Behavior Of Aluminum Tubes Repaired With A Carbon/Epoxy
Hoop Strip |
| 1106 |
Design Of Piezoelectric Actuators Using The Topology Optimization
Based On Density Method |
| 1109 |
Topology Optimization Of Mass Under Multiple Load Conditions
And Material Failure Constraints |
| 1123 |
Vibration Control Of A Smart Helicopter Blade |
| 1131 |
Numerical Solution Of The Motion Equation Of Rigid Rotors
Supported By Squeeze Film Damper Bearings |
| 1134 |
Transverse Vibration Analysis Of Rotating Shafts |
| 1154 |
Estimation Of Optical Thickness, Single Scattering Albedo
And Diffuse Reflectivities With A Minimization Algorithm Based
On A Interior Points Method |
| 1179 |
On The Heat Of Transformation In Shape Memory Alloys Under
Load |
| 1198 |
Application Of Feedforward And Recurrent Neural Networks For
Flapping And Torsion Identification Of A Helicopter Blade |
| 1210 |
Numerical Analysis Of The Coupled Poroelasticity Using The
Finite Element Method |
| 1225 |
Simulation Of Wave Propagation In An Heterogeneous Elastic
Rod |
| 1256 |
Failure Case Analysis - Effect Of Enforced Displacement In
Shear Tie Components |
| 1293 |
Modal Control Applications In Intelligent Truss Structures |
| 1298 |
A New Methodology To Apply Essential Boundary Conditions In
Meshfree Methods |
| 1317 |
Comparison Between Experimental And Theoretical Predictions
Of The Interface Force Due To Soft Missile Impact |
| 1326 |
A Method For Eigenvalue Maximization In Structural Optimization |
| 1327 |
Optimal Buckling Load Of Composite Plates With Stiffeners
Operating Within A Given Temperature Range |
| 1349 |
Frequency Response Function Of Stochastic Structures |
| 1351 |
Evaluation Of A Experimental Modal Synthesis Method Using
Mass-Normalized Modes |
| 1416 |
Use Boundary Element Method For Analysis 3d Of Elastic Problems |
| 1441 |
Mixed Formulation For Viscoplasticity |
| 1483 |
Positional Control Of A System With Multiple Flexible Appendages
Using Lqr Design |
| 1588 |
Design Of A Hopkinson Bar For Dynamic Material Characterisation |
| 1593 |
Impact On Aircraft Structures |
| 1612 |
A Study On The Fretting Fatigue Behavior Of Titanium |
| 1628 |
A Boundary Element Study On 3d Soil Vibration Isolation Using
Trenches And Barriers |
| 1650 |
Application Of The Composite Element Method To The Free Vibration
Plate Problem |
| 1651 |
Transient Response Of 2d Rigid Foundations Resting On The
Surface Of A Transverse Isotropic Viscoelastic Layer. |
| 1668 |
Damage Identification In Shell Structures Using Natural Frequencies |
| 1689 |
Cutting Tools Selection Through Cad Resources |
| 1770 |
Measurement And Prediction Of Mobility Transfer Function Of
An Elastic Plate Covered With A Foam Layer. |
| 1799 |
Order Tracking Methods Analysis |
| 1818 |
Design Of Layered Piezoelectric Plate And Shell Structures
For Minimum Compliance By Using Topology Optimization |
| 1854 |
Modeling Aspects Of Active Constraining Layers As Applied
To Rectangular Plates |
| 1875 |
3d Cyclic Symmetry In The Analysis Of A Coupled Structural-Acoustic
System |
| 1892 |
Dynamic Plastic Buckling Of Open Shells |
| 1906 |
Object Oriented Programming And Cad Technology Applied To
A Finite Element Technique For The Limit Analysis Of Axisymmetrical
Shells |
| 1958 |
Fatigue Damage Accumulation In Aluminum 7050-T7451 Alloy Subjected
To Block Program Loading: A Study Compared With The Linear Damage
Rule |
| 1987 |
Geometrical Aspects On Bi-Material Microtensile Tests |
| 2004 |
A Note On Flow Classification |
