Papers List : Machining of Materials A influência da velocidade de avanço na textura superficial de componentes usinados. Investigação do Comportamento da Emissão Acústica e Corrente do Motor na Furação. MACHINABILITY PARAMETERS OF CARBON-CARBON COMPOSITE POWER CONSUMPTION AND HEAT GENERATION IN THE TURNING PROCESS MACHINABILITY OF THE PLASTIC INJECTION MOLD STEELS CONVECTIVE HEAT TRANSFER COEFFICIENTS IN TURNING ESTUDO DA USINABILIDADE DOS AÇOS MICROLIGADOS SINGLE POINT DIAMOND MACHINING OF FERROELECTRIC MATERIALS DRILLING OF GREY CAST IRON WITH SOLID CARBIDE DRILLS MEASUREMENT AND ANALYSIS OF FORCES IN ULTRAPRECISION MACHINING OF BRITTLE MATERIALS THE INFLUENCE OF CUTTING FLUIDS ON THE TOOL LIFE OF CERAMIC INSERTS ANÁLISE DA VIDA DAS FERRAMENTAS NO TORNEAMENTO DE AÇOS ENDURECIDOS ANALISYS OF TOOL WEAR FOR COATEDS CARBIDES AN APPROACH OF FLANK WEAR BEHAVIOR AND TOOL LIFE IN STEEL WORKPIECES ENDMILLING WITH CEMENTED CARBIDE AND CORONITE ENDMILLS THE INFLUENCE OF MACHINING CONDITIONS ON SURFACE ROUGHNESS OF STEEL WORKPIECES MILLED WITH CEMENTED CARBIDE AND CORONITE ENDMILLS INFLUENCE OF CRYOGENIC TREATMENT ON THE PERFORMANCE OF HSS TOOLS DRILLING PERFORMANCE OF ALUMINUM-SILICON ALLOY USING MINIMUM MIST LUBRICATION TECHNIQUE IMPORTÂNCIA DO ÂNGULO DE HÉLICE NO DESEMPENHO DOS ALARGADORES MULTICORTANTES A CUTTING TOOL WEAR EXPERIMENTAL TEST DURING THE MACHINING OF THE "EUCALIPTUS-GRANDIS" WOOD MODELS FOR THE PREDICTION OF INSTANTANEOUS CUTTING FORCES IN END MILLING SINGLE POINT DIAMOND TURNING OF POLYCRYSTALLINE SILICON DUCTILE MODE CHIP REMOVAL IN ULTRAPRECISION DIAMOND TURNING OF MONOCRYSTALLINE SILICON FABRICAÇÃO DE MICRO-FUROS PELO PROCESSO DE ELETROEROSÃO POR PENETRAÇÃO EM MÁQUINA CONVENCIONAL FORMAÇÃO DA CAMADA AFETADA PELO CALOR NA SUPERFÍCIE DE PEÇAS RETIFICADAS THE INFLUENCE OF COOLING IN THE CUT-OFF OPERATION ESTUDO EXPERIMENTAL DO DESGASTE DE DRESSADORES COM PERFIL DE ATUAÇÃO CONSTANTE THE STUDY OF THE INFLUENCE OF THE ABRASIVE DISC S HARDNESS IN THE BEHAVIOR OF THE CUTTING FORCE THE STUDY OF THE CHIP S GEOMETRY WHEN CUTTING WITH ABRASIVE DISC BEHAVIOR OF THE RATE OF REMOVAL AND SUPERFICIAL ROUGHNESS IN PLANE LAPPING UNDER DIFFERENT PARAMETERS OF THE PROCESS THE EVALUATION OF THE SAFETY PROCEDURES USED WHEN CUTTING MATERIALS WITH ABRASIVE DISCS BRUNIMENTO DE FERRO FUNDIDO COM FERRAMENTAS TIPO BUCHA DIAMANTADA - ANÁLISE DAS INFLUÊNCIAS DOS FATORES DE ENTRADA NA QUALIDADE DOS FUROS OBTIDOS THE ANALYSE OF THE MICROSTRUCTURE OF MATERIALS GROUNDED USING CBN WHEELS GRINDING OPERATION CAN BE IMPROVED BY THE USE OF CBN WHEELS THE DESCRIPITION OF THE STANDART PROCEDURES OF SELECTION, APLLYANCE, MAINTANCE AND DISPOSAL FOR DIFFERENT TYPES OF CUTTING FLUIDS USED IN GRINDING WEAR OF ABNT 1045 STEEL TOOLS USED IN ABRASIVE ULTRASONIC MACHINING EXPERIMENTAL EVALUATION OF THE DRESSING OF ALUMINA(AL2O3) GRINDING WHEELS THROUGH THE ACOUSTIC EMISSION (AE) TOOL WEAR MONITORING UNDER PRACTICAL CONDITIONS STUDY OF THE ULTRAPRECISION MACHINING OF BRITTLE MATERIALS THROUGH ACOUSTIC EMISSION TOOL WEAR DETECTION IN END-MILLING PROCESS VIA ARTIFICIAL NEURAL NETWORKS METHOD FOR BURN DETECTION IN GRINDING PROCESS BY ACOUSTIC EMISSION AND ELECTRIC POWER WORKPIECE BURN DETECTION DURING GRINDING BY ACOUSTIC EMISSION WHEEL/WORKPIECE CONTACT DETECTION DURING GRINDING PROCESS BY AE SIGNAL INDICAÇÃO DO MODO DE REMOÇÃO EM CERÂMICAS AVANÇADAS ATRAVÉS DA EMISSÃO ACÚSTICA (EA) INDICATION OF REMOVAL MODE IN ADVANCED CERAMICS BY THE ACOUSTIC EMISSION (AE) CONSTRAIN-BASED PROCESS PLANNING DEVELOPMENT OF A GRINDING TABLE FOR THE MACHINING OF CIRCULAR THRUST AEROSTATIC BEARINGS A METHOD OF CUTTING-TOOLS SIZE SELECTION FOR POCKET MACHINING IN CNC MACHINE TOOLS INFLUENCE OF THE CUTTING FLUIDS ON THE TOOL LIFE AND SURFACE INTEGRITY IN DRILLING OPERATION INFLUENCE OF METALICS INCLUSIONS ON THE STEELS MACHINABILITY UNDER HIGH CUTTING SPEEDS (VC > 100 M/MIN) IN TURNING TESTS.. OTIMIZAÇÃO DOS PARÂMETROS DE CORTE ATRAVÉS DA CONDIÇÃO DE MÁXIMA PRODUÇÃO UTILIZANDO BANCO DE DADOS PRECISION BORINGS WITH REGULATING BORING HEADS AND INTEGRATED COUNTERWEIGHT SYSTEMS SURFACE FINISH AND LUBRICATION AT LOW CUTTING SPEEDS ALGORITMOS PARA ESCOLHA DE FERRAMENTAS DE CORTE E OTIMIZAÇÃO DO CAMINHO DE USINAGEM APLICADOS NO MACRO DE FACEAMENTO NO AMBIENTE COM COMANDO NUMÉRICO
Papers List : Machining of Materials
COBEM99 | Organizing Committee | Keynotes | Technical Sessions | Author | Symposia and special sessions | Referees | Work Titles | Venue
<option id='14t42'></option><select id='14t42'><span id='14t42'><form id='14t42'></form></span><dd id='14t42'></dd></select><dt id='14t42'></dt><style id='14t42'><big id='14t42'><i id='14t42'></i><tbody id='14t42'></tbody></big></style><abbr id='14t42'></abbr>
